EP9302 GPIO DRIVER

The blue marked objects on the picture are the on-board chips and components, while the green ones are the various on-board headers and connectors for peripherals. In addition, SD Cards feature content protection, planned capacity growth, high-speed data transfer, and a write protect switch. Should the need arise to automatically bypass the fastboot and proceed directly into starting the SD card version of Linux, you can do so with the following command issued to the fastboot shell:. The SD card has a slightly different partition scheme to facilitate usage on a host PC. Relocate the unit with respect to the receiver. Therefore, the command ifup eth0 or ifconfig eth0 up brings up the on-board ethernet interface on TS SBCs.

Uploader: Tulabar
Date Added: 20 March 2018
File Size: 33.34 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 38792
Price: Free* [*Free Regsitration Required]

The backlight can be enabled and dimmed.

Use the “shutdown -h now” command to halt the Linux system when running from SD or USB memory card to avoid corruption issues. This manual is intended to provide the user with an overview of the board and benefits, complete features specifications, and set up procedures.

After the desired Linux Kernel is loaded and executed, the file system loads and networking, logging, Apache web server, etc. To download a file to the TS from your host PC, execute lrz at the Linux command line on the TS while using console-redirection from within your terminal emulator and begin the transfer with your terminal emulator.

For applications with instruction-memory size restrictions, the ARMT’s compressed Thumb instruction set provides space efficiency and maximum external instruction memory usage. When power is first supplied to the TS, both LEDs are immediately turned on under hardware control.

Related Drivers  DSC-F828 USB DRIVER DOWNLOAD

The blue marked objects on the picture are the on-board chips and components, while the green ones are the various on-board headers and connectors for peripherals. Pin numbering is arranged as follows:. It is also possible to talk to hardware devices from user space. Of course, should you wish to configure your own version of Linux or use a different operating system, this is easy too. It is important for the user program to use these values as per our sample code, which can be found either on our website or in the CD included in the Developer’s Kit.

TS – Technologic Systems Manuals

However, they have the added advantage of being removable media. One can still use cross-compilers hosted on just about any platform if there is a specific need. Entering ifconfig shows the current ethernet settings. The modified source code is available to Technologic Systems ypio.

The WDT Control register must be initialized gplo the timeout period desired. For best results when using HyperTerminal, the hardware handshaking must be enabled in HyperTerminal. Flash memory provided by these devices behaves much as a hard drive does with sizes ranging from 32MB to 16GB.

Your board might include a screw power connector on the power input. Check our website at www. Next, it composes up the necessary pre-boot ATAG data structures required by Linux kernels and jumps to address 0x at which point the Linux kernel takes over. Rp9302 Technologic Systems for larger Flash sizes.

But the MMU is programmed to remap the blocks of RAM to appear as a contiguous block of memory at the very beginning of the virtual memory map. An example program has been made available which demonstrates this principle by gathering data from the buffered inputs of the TS which is practically identical to the TS here: Please note that changes made to files on ep93022 initial ramdisk are saved only in RAM.

Related Drivers  ATEN CS-64U DRIVER

Use the shutdown -h now command to halt the Linux system when running from Compact Flash, SD or USB memory wp9302 to avoid a potentially lengthy file system check on the next boot, since the file system running is EXT2 formatted.

High-Performance, Networked, ARM9, System-on-Chip Processor

SD Memory Card technology provides large capacity and fast access combined with a compact and slim profile, making it very appealing for a wide range of next generation products and applications. In addition, SD Cards feature content protection, planned capacity growth, high-speed data transfer, and a write protect switch. Upon bootup, you should see out ep902 your serial port when booting from a properly formatted SD card:. A video core is included in the default load. Connect a regulated 5VDC, 1A minimum power source on the power input connector.

In HyperTerminal, this is ‘Send File In no event shall Technologic Systems be liable or responsible for any loss or damages, including but not limited to any lost profits, incidental or consequential damages, loss of business, or anticipatory profits arising from the use or inability to use this product.

It will maintain clock ggpio for a minimum of 10 years gpo the absence of power.